5 ℃
AUTO CENTER ANĐELKOVIĆ
From a small independent craft shop established in 1961, it has been an auto center since 1980. With many years of practical experience with cars and their issues, we are at your disposal.
You can view the appearance of our center HERE
EVERYTHING IN ONE PLACE:
WE PERFORM WORK SUCH AS:
For more details, please see HERE
SERVICE AND REPAIR OF VEHICLES SUCH AS:
Fiat, Alfa Romeo, Volkswagen, Audi, Seat, Škoda, Peugeot, Citroen, Renault, Mercedes, BMW, Opel, Ford, Volvo, Mazda, Mitsubishi, Nissan, Toyota, Kia, Suzuki, Hyundai, Daewoo, etc.
We offer special benefits for servicing, maintenance, and repair of passenger, van, and light commercial vehicles for private and corporate firms.
The parts we install are original from well-known brands. For parts that we install, we provide a warranty specified by the manufacturer. We can also install parts you bring, but we do not provide a warranty for those.
AUTO MECHANICAL SERVICES
Auto mechanical services include regular and emergency maintenance. We carry out all these tasks with the appropriate tools to achieve the most accurate results. Along with the appropriate tools that facilitate easier and higher quality work, we have workshop data for all vehicles.
For more details, please see HERE
ELECTRONICS AND DIAGNOSTICS
As vehicles become more electronic, a good auto electrician is more valuable than an ordinary mechanic. All systems are connected to electronics that control and manage vehicle operations.
Electronics control and manage all systems in our vehicle, such as:
To solve faults in these systems, you must have a good auto electrician who possesses extensive knowledge and experience and uses appropriate equipment to identify faults and save you money; any mistakes made will increase repair costs.
In today’s world, where everything is expensive, you cannot entrust your vehicle to an unqualified worker with a cracked diagnostic device for fault identification. A wrong diagnosis will only increase your repair costs. Instead, you should go to a service that has a qualified auto diagnostic technician equipped with quality diagnostic devices and factory data.
The auto electrician in our service has vast experience and knowledge and works with diagnostic devices. They use original diagnostic devices and programs with factory data.
They diagnose and resolve faults in vehicles related to electronic devices in any of the mentioned systems. They are informed about new methodologies of component operation and regularly attend training to enhance their knowledge. They hold internationally recognized ECAP certificates in auto electronics and other essential components found in the vehicles we use.
Our motto is to eliminate faults in vehicles and return them to factory condition as designed by the manufacturer.
We do not engage in removing essential elements such as electronically and physically disabling EGR valves, disabling DPF filters, and their physical removal.
The auto electrician in our service is tasked with enabling the vehicle and returning all assemblies and parts to function as they were manufactured.
Auto Center ANĐELKOVIĆ has original diagnostic devices, oscilloscopic measuring instruments, original workshop data, and electrical diagrams for identifying electronic faults, which our auto electrician uses to solve problems on all electronic devices.
For more details, please see HERE
AUTO ELECTRICS
When repairing and servicing alternators or starters, we conduct a load test on the test bench before installation in the vehicle.
For more details, please see HERE
PREPARATION FOR VEHICLE TECHNICAL INSPECTION
DEAR DRIVERS,
Avoid hassle; don’t go for a routine technical inspection without being sure that your vehicle is in good condition.
To prevent being turned away due to faults, we advise you to visit a mechanic at least 15 to 30 days in advance to check your vehicle and address any issues for the regular technical inspection on time.
You must know that addressing faults in the braking system, such as replacing front or rear brake pads, must be done beforehand to ensure that the replaced parts achieve proper seating during use, thus providing quality braking. In most cases, replaced brake pads or linings one (1) day before going for a technical inspection will not achieve the necessary braking forces and cannot pass the technical inspection.
We RECOMMEND that you inspect and repair your vehicle at our service. After working on the braking system, we conduct a braking force check on rollers that comply with the new traffic safety law. We mention this because all technical inspections have rollers that measure braking forces under the new law. When we achieve satisfactory braking forces on our rollers, we guarantee that you will not be turned away from the technical inspection due to poor braking forces.
For all the work we perform, you will receive printed reports: diagrams of braking forces, wear status of shock absorbers, front and rear suspension, engine condition, and body condition.
For more details, please see HERE
DECARBONIZATION
Decarbonization is PREVENTIVE. We use it to melt initial deposits of soot (carbon) and prevent the formation of deposits within: EGR valves, combustion chambers, pistons, injectors, spark plugs, heaters, DPF filters, DPF temperature sensors, lambda probes, catalytic converters, turbines, exhaust valves, and exhaust manifolds.
These deposits cause significant blockages in the engine space and the exhaust system. They affect improper engine operation and loss of power, increasing fuel consumption.
By using our hydrogen decarbonization machine, we will remove almost all accumulated carbon within 60 to 90 minutes, depending on engine displacement, and it will run like new.
The carbon cleaning machine has outstanding cleaning capacity. This advanced technology, developed over many years, achieves top results. Hydrogen is injected through the air intake pipes, burning up to 75% of the carbon deposits that impede proper engine operation.
This procedure does not contain any harmful, dangerous, or aggressive chemicals; its only byproduct is water vapor.
Decarbonized engines regain their performance, become livelier, more reliable, and achieve reduced fuel consumption.
Advice:
For the best results, we recommend that after the DECARBONIZATION treatment - carbon cleaning, you take a 25 to 30-minute drive outside the city traffic, driving in a lower gear (around 2500 to 3000 rpm) to remove any remaining carbon residue from the exhaust system.
PERFORM DECARBONIZATION OF YOUR ENGINE IN OUR SERVICE USING THE LATEST CLEANING METHOD.
For more details, please see HERE
CLEANING OF DPF AND CATALYTIC CONVERTER FILTERS
PROFESSIONAL MACHINE WASHING/REGENERATION OF ALL TYPES OF FILTERS: DPF/FAP, SCR, AND CATALYTIC CONVERTERS OF GASOLINE ENGINES
Blockages from excessive PM10 particle deposits, oil dirt, and cerium particles accumulating in the DPF filter lead to its clogging, resulting in excessive engine load. In addition to loss of engine power, the consequences of DPF pollution can be catastrophic.
It is not uncommon to hear or see a vehicle catching fire on the road; this happens due to driving in urban conditions when the vehicle cannot perform self-regeneration, negligence, and poor engine maintenance by the user.
To avoid such situations, monitor the warning lights on the dashboard that inform you of the need for self-regeneration. Ignoring that warning will have consequences.
If you find that you have a clogged DPF filter, contact us to resolve the problem. The solution to the clogged DPF/FAP (SCR) or catalytic converter filter is washing/regeneration, performed in a cabin with warm water and the addition of ecological liquid to break down soot deposits and harmful PM10 particles. In this way, through washing, we achieve 96% clean regenerated filters as good as new.
THE WASHING/REGENERATION PROCESS ENDS WITH DRYING AT TEMPERATURES UP TO 200°C IN A...
